iStarsoft
審查, 提示與技巧

192.168.1.X 的使用方式? 從 192.168.1.2 自 192.168.1.5

0 81

您可能會遇到 IP 位址, 如 192.168.1.2, 192.168.1.3, 192.168.1.4 和 192.168.1.5 在各種情況下. 如果你是網路主題的新手, 這些IP位址可能會讓您有點困惑. 所以, 我們想到寫一篇文章,解釋這些IP位址及其功能.

什麼 192.168.1.2

192.168.1.2 被視為私人 IP 位址. 事實上, 許多家庭寬頻路由器,在美國以外出售使用 192.168.1.2 作為預設的 IP 位址. 除此之外,, 相同的 IP 位址通常出現在家用網路中使用的設備中. 然而, 當相應的路由器具有 IP 位址時,就會發生 192.168.1.1.

在一般情況下, 公共位址預計將是互聯網上獨一無二的. 然而, 192.168.1.2 沒有這樣的要求. 相反, 它預計將在各自的本地網路中是唯一的. 這是某些路由器的預設 IP 位址. 然而, 您可以將本地網路上的任何路由器或電腦配置為 192.168.1.2.

連接到 192.168.1.2

在一般情況下, 不需要訪問路由器的管理主控台才能連接到 192.168.1.2. 然而, 如果某些連接問題持續存在,您必須登錄到管理主控台. 還, 這是一個要求,如果你設置你的路由器第一次. 更改路由器密碼, 設置自訂 DNS 伺服器, 創建 Wi-Fi 網路, 等. 需要管理員登錄,


假設特定路由器的 IP 位址 (本地網路) 設置為 192.168.1.2. 在這種情況下, 應在 Web 瀏覽器的網址列中輸入 IP 位址. 通過此操作, 您將能夠登錄到路由器的管理主控台. 所以, 位址將是 HTTP://192.168.1.2/

輸入 IP 位址後, 您將看到一個頁面,其中顯示一個欄位以輸入憑據. 取決於路由器的品牌, 你可以通過互聯網搜索找到它的使用者名和密碼. 在大多數情況下, 大多數路由器製造商使用'admin’ 作為使用者名和密碼. 還, 一些製造商在路由器底部寫下了憑據.

任何機會, 如果您忘記了路由器的密碼, 您可以手動重置它. 然後, 憑據將設置為預設值; 您可以更改這些設置,如你以後希望.

原因 192.168.1.2 被經常使用

製造存取點和路由器等設備的人員必須在專用範圍內分配 IP 位址. 在開始的時候, 領先的寬頻路由器製造商有 192.168.1.X 作為預設 IP 位址. 事實上, 這種私人範圍通常以 192.168.0.0. 然而, 大多數人認為數位序列應該從一個開始,而不是從零開始. 這就是為什麼 192.168.1.1 在啟動家用網路時,看起來是一個更好的選擇.

現在路由器具有此編號規則的第一個 (192.168.1.1), 其餘的數位如下. 這就意味著, 數位從 192.168.1.2 將分配給網路上的其他設備. 這就意味著, 192.168.1.2 將是分配給設備的第一個 IP 位址, 其餘的數位將跟隨它.

如何分配 192.168.1.2 到本地網路上的一台設備?

大多數網路通常在其設備上使用動態 IP 位址. 即通過使用 DHCP. 這就意味著, 設備的 IP 位址將被頻繁自動更改. 或, IP 位址將分配給其他設備.

DHCP 被認為是允許分配的首選方法 192.168.1.2 到設備. 然而, 也可以分配靜態 IP 位址. 然而, 如果配置不是以戰略方式完成的,您應該會出現一些連接問題.

何時應選擇靜態 IP 位址?

在靜態或動態 IP 位址之間進行選擇時,應記住一些重要事項.

  • 本地 DHCP 路由器可以配置一系列私人 IP 位址. 然後, 它可以分配給用戶端.
  • 假設您的家庭路由器分配了預設 IP 位址 192.168.1.1. 在這種情況下, 將有一組預設的用戶端 IP 位址. 這些位址的範圍可以從 192.168.1.2 自 192.168.1.255. 通常的做法是分配範圍較低的設備 (例如, 192.168.1.2, 192.168.1.3, 192.168.1.4, 192.168.1.5, 等。). 所以, 你幾乎會看到一個值像 192.168.1.250 在家用網路中.
  • 在一般情況下, 路由器不檢查 IP 位址是否已手動分配給用戶端. 相反, 無論位址是否已使用,它都隨機將 IP 位址分配給設備. 這正是為什麼你會看到由多個用戶端組成的家用網路中的 IP 位址衝突.
  • IP 位址衝突可能會中斷兩個設備的網路連接和資料順暢流.

由於所有這些原因, 我們建議您讓路由器將 IP 位址分配給家用網路中的設備.

什麼 192.168.1.3

192.168.1.3, 就像 192.168.1.2, 是本地網路上的常用 IP 位址,特別是. 此位址經常用於 IP 位址範圍以 192.168.1.1. 這意味著路由器分配網路 192.168.1.1.

根據理論, 路由器可以分配 IP 位址 192.168.1.3 連接到它的任何設備. 這可以自動完成. 如果不是, an administrator can assign this IP address manually.

事實上, you will not find anything special on this IP address. It is just another IP address which is used automatically by the router.

Assigning 192.168.1.3 自動

Devices such as computers that are compatible with DHCP (Dynamic Host Configuration Protocol) usually get their IP addresses automatically. They communicate with the router as soon as they are connected and obtains a new IP address every time. It is the router that decides the IP address given to each device connected to the network. 通常, the router sets up a network range within 192.168.1.1 和 192.168.1.255. The router takes one from this sequence (總的來說, 它是 192.168.1.1). Then the router maintains the rest of the addresses and assigns them into the pool. 在一般情況下, the router utilizes these IP addresses in sequential order. It assigns 192.168.1.2 to the first device, 然後,第二個設備將分配 192.168.1.3. 第三個設備將是 192.168.1.4, 它繼續. 訂單不保證, 雖然.

Assigning 192.168.1.3 手動

當涉及到像遊戲機這樣的設備時, 電腦, 行動電話, 標籤, 和其他設備接受手動 IP 分配. 然而, 它不像在設備上輸入 IP 位址那麼簡單. 相反, 應該有一個配置過程來完成在路由器本身分配一個IP位址.

與 192.168.1.3?

更多的經常不, 網路通過 DHCP 模式分配私人 IP 位址, 它發生動態. 如果嘗試為 192.168.1.3 手動, 這並非不可能. 它可以以靜態或固定分配的形式完成. 然而, 我們不推薦這樣的方法為家用網路. 這尤其因為 IP 位址衝突的可能性.

大多數家用網路通常具有 192.168.1.3 in their IP address pool by default. Like with 192.168.1.2, 192.168.1.3 is assigned to devices automatically too without checking if it is already assigned. 由於這個過程, you will have a network conflict on the home network. Assume that you have manually assigned a device with 192.168.1.3 on your home network. 然後, if the router assigns another device with the same IP address, there will be a conflict. 在這種情況下, both devices will experience connection issues.

Assume that your home network is configured to DHCP and it has a device with IP address 192.168.1.3. And you keep the aforesaid device disconnected for some period and reconnect it. 在這種情況下, the same device may be reassigned with a different IP address. The duration is regarded as ‘lease periodin a DHCP network. 和, this lease period differs depending on the configuration of the network. 然而, this lease period can fall between two to three days. 然而, if you don’t connect a newer device to the same network, IP address 192.168.1.3 will remain unassigned. Whenever you connect the aforesaid device back into the same network, the same IP address may be reassigned. That is only if the other devices on the networks maintain their original IP addresses.

什麼 192.168.1.4?

192.168.1.4 takes the fourth place of the IP address sequence of 192.168.1.1 自 192.168.1.255. 在一般情況下, home routers use this range (192.168.1.1 自 192.168.1.255) to identify the local devices connected to the router. The router has the ability to assign 192.168.1.4 automatically to any of the devices that are connected. 除此之外,, the administrators of the network can do it manually.

Assigning 192.168.1.4 自動

截至今天, many devices can connect to DHCP networks and are compatible with dynamic addresses. They obtain their IP addresses automatically from the respective router. 在這種情況下, 是路由器決定哪個位址應該分配給哪些設備. 它更像是一個隨機的過程. 此序列中的位址通常稱為 DHCP 池.


讓你更清楚, 假設您家裡有路由器. 此路由器應具有 IP 位址 192.168.1.1, 這是序列的第一個數位. 如果僅將另一台設備連接到此路由器, 它將被賦予IP位址 192.168.1.2. 所以, 具有路由器且只有一個其他設備的網路將僅使用兩個 IP 位址. 如果將第二台設備連接到同一網路, IP address 192.168.1.3 將分配給它. 同樣, 您連接的設備將按順序給出 IP 位址. 此範圍可以高達 192.168.1.255. 和, 如果您有第三個設備連接到此網路, 這將是IP位址 192.168.1.4. 所以, 簡而言之, 192.168.1.4 is just another number in this sequence. The order of the sequence cannot be guaranteed because it happens according to a random process. 所以, the most accurate thing to say would be that 192.168.1.4 is the third IP address of the sequence. 和, it can be assigned by the router to any device on a DHCP network.

Assigning 192.168.1.4 手動

截至今天, devices like phones, printers, gaming consoles, 標籤, 筆記本 電腦, 等. allow administrators to configure IP addresses manually. Whoever has access to the devices can change the IP addresses of the devices by putting in the numbers. These numbers can be configured through the administrator privileges. But you should remember that assigning an IP address manually is way beyond typing the numbers. Just because you enter a number, you cannot guarantee that it would work correctly. There is a lot to consider when assigning an IP address. Apart from assigning a number to the device itself, you should configure it in the router page. 否則, it will not support the data transferring.

與 192.168.1.4?

在大多數情況下, you would experience that private IP addresses are assigned through DHCP protocol. 然而, assigning 192.168.1.4 manually to the device of your preference is pretty different from that process. It requires a ‘fixedor ‘staticassignment. 然而, we don’t recommend you do it unless you know very well about network configurations. The reasons are mentioned in the following paragraphs.

When you set an IP address manually, there is a risk for an IP address conflict situation. That happens when there are two devices with the same IP address on the same network. 在一般情況下, the routers have 192.168.1.4 as one of their DHCP IP addresses by default. 所以, the router doesn’t check if the respective IP address is already assigned or not. 相反, it assigns the DHCP IP addresses to the devices detected by the router. 所以, just assume that you already have assigned 192.168.1.4 manually to a device. 然後, you connected another device to the same network. 然後, since the protocol is DCHP, the router can assign 192.168.1.4 to this new device randomly. That means you have two devices on the same network with the same IP number. 在這種情況下, the obvious result is an IP address conflict. Both devices will experience connection issues under this circumstance.

Suppose that you kept a certain device disconnected from the network for a few days. You should also assume that the IP address of that device is 192.168.1.4. 很好, after some time, the respective IP address will be reassigned to another device. The length of time is regarded as the ‘lease periodwhen it comes to DHCP. This lease period might vary depending on the type of configuration of the network. 在一般情況下, this lease period can be around 2-3 天. If you don’t connect a newer device to the same network, 192.168.1.4 will remain reserved. Once you connect the previous device to the same network, it will be reassigned to the same device.

什麼 192.168.1.5?

Just like you have expected, 192.168.1.5 is the 5th option in a DHCP protocol IP address pool. 192.168.1.5, just like the previous IP addresses we have mentioned, is a private IP address. This IP address is usually found in home routers that have at least five devices or more. It can be assigned automatically to a device connected to a certain network. 除此之外,, you can even configure your router to use this IP address to it. But hardly any user would assign 192.168.1.5 to the router (router usually comes with 192.168.1.1 預設情況下).


Assume that 192.168.1.5 is already assigned to a device. But that doesn’t allow you to access it as you would do with the router’s IP address. 然而, you can communicate with the device using the Ping command and check if the device is working.

舉個例子, say that 192.168.1.5 is assigned to a printer and you want to check if it is active. 在這種情況下, you should send a ping command to the respective IP address.

Assigning 192.168.1.5 自動

Like with 192.168.1.2, 192.168.1.3 和 192.168.1.4, you can expect the router to assign a device with 192.168.1.5 自動.

在一般情況下, the router has 192.168.1.1 for itself and rest of the IP addresses (到 192.168.1.255) for other devices. These addresses will be assigned to devices according to a sequential order. 所以, you don’t have to worry about assigning IP addresses as it automatically happens.

Assigning 192.168.1.5 手動

If you prefer, you can simply assign 192.168.1.5 to a preferred device. 然而, we don’t recommend you do it unless you have good knowledge about what you do. 換句話說, manual IP address configuration is a task that should be handled by a professional. Manual IP address configuration is complex task rather than just typing a series of numbers. If you don’t do it properly, network conflicts may occur, and you already know the reasons. We have explained the cause behind IP address conflicts in previous sections.

很好, that’s the information we wanted to share about 192.168.1.2, 192.168.1.3, 192.168.1.4192.168.1.5. As you would see, configuring a home network can become complex if you handle it improperly. 所以, we highly recommend you to stay away from manual configurations unless you know what you do. 否則, there will be annoying consequences such as IP address conflicts that will prevent smooth network operation.

您可能還喜歡

留言

您的電子郵件地址將不會被公佈.

本網站使用 cookie 來改善您的體驗. 我們假設你對此沒問題, 但如果你願意, 你可以退出宣告. 接受瞭解更多